wak648...Bill 94 Posted August 1, 2013 Report Share Posted August 1, 2013 I know a long time ago I asked the same question and have my personal preference on the topic of lubing the trailer hitch. But I figured with the newer members to reask the question to see some more opinions on the topic. I occasionally spray some WD40 on the jaw/moving parts of my trailer toungue. Had it goop up on me once and made it difficult to get it to close and secure on the ball of the hitch. I found that spraying it has prevented anymore issues. Quote Link to post Share on other sites
Nicki aka Rebelstand 272 Posted August 1, 2013 Report Share Posted August 1, 2013 :clint: Quote Link to post Share on other sites
wak648...Bill 94 Posted August 1, 2013 Author Report Share Posted August 1, 2013 Yes I am well aware that this is a loaded question for some. Quote Link to post Share on other sites
DaveInTN 3,247 Posted August 1, 2013 Report Share Posted August 1, 2013 I have never used a lubricant on the hitch ball or tongue socket. I have an Equilizer hitch and lube the necessary parts per the manufacturer's instructions, including the WD bars, taking care not to lube so much as to eliminate any anti-sway benefits that those bars provide. But I've never applied lubricant to the ball and have never had any issues. Quote Link to post Share on other sites
doodlebug....Cherie 461 Posted August 1, 2013 Report Share Posted August 1, 2013 Ok, this will sound crazy but it works better than anything out there. PAM cooking spray. It doesn't goop up and washes out in the laundry if you get it on your clothes. BradyBzLyn...Mo and Nicki aka Rebelstand 2 Quote Link to post Share on other sites
ImDownWithDisney 342 Posted August 1, 2013 Report Share Posted August 1, 2013 I lube. Mainly because I wore a flat spot on the ball with my equipment trailer. Quote Link to post Share on other sites
Tom 15 Posted August 1, 2013 Report Share Posted August 1, 2013 Real men don't lube we just force it.. not really I use silicone lube less dirt atraction Quote Link to post Share on other sites
CCIntrigue...aka Gwen 547 Posted August 1, 2013 Report Share Posted August 1, 2013 When we had a TT our dealer advised us not to lube. Quote Link to post Share on other sites
ftwildernessguy 778 Posted August 1, 2013 Report Share Posted August 1, 2013 Lube liberally. Don't worry, it won't slip out, and it prevents a lot of groaning. Quote Link to post Share on other sites
wak648...Bill 94 Posted August 1, 2013 Author Report Share Posted August 1, 2013 But doesn't groaning mean you are doing it right? Quote Link to post Share on other sites
BradyBzLyn...Mo 2,023 Posted August 1, 2013 Report Share Posted August 1, 2013 Quote Link to post Share on other sites
mommy rainbo.....Bo 41 Posted August 2, 2013 Report Share Posted August 2, 2013 I use to lube the ball on my truck when I had a gooseneck horse trailer. Don't know if I was suppose to but seemed like a good idea at the time. Quote Link to post Share on other sites
DaveInTN 3,247 Posted August 2, 2013 Report Share Posted August 2, 2013 I use to lube the ball on my truck when I had a gooseneck horse trailer. Don't know if I was suppose to but seemed like a good idea at the time. What's a goosenecked horse? And why would you lube its balls? Quote Link to post Share on other sites
wak648...Bill 94 Posted August 2, 2013 Author Report Share Posted August 2, 2013 What's a goosenecked horse? And why would you lube its balls?What don't you know? If Lars was here, he would tell you that, if something's gooseneck horse is pulling a lots of weights for prolonged periods of times you need, to use the xfactor formula that describes the proper torCk and lube ratio needed. Do yes you need to lube you gooseneck horse's balls. IMHO of course. Quote Link to post Share on other sites
Helmsey......Todd 134 Posted August 2, 2013 Report Share Posted August 2, 2013 Add me to the ball lubing group, I keep a tube of Red N Tacky handy for my lubrication needs. Quote Link to post Share on other sites
BuckeyeFortFan 35 Posted August 2, 2013 Report Share Posted August 2, 2013 When I had balls, I did lube them. Reese sells a Teflon ball grease that I always assumed was the best thing to use. A cupcake-ish type would probably say that a WD-40 type product is more of a "penetrant" than a "lubricant" and not made to hold up to the rigorous abuse that a ball undergoes when pulling a 45 foot TT with a mod-ded out E-350. I think if you sprayed it often it would do just fine. Quote Link to post Share on other sites
bigdisneydaddy 9 Posted August 2, 2013 Report Share Posted August 2, 2013 I use white lithium paste on the ball and the pivot points of the WD bars. For the ball latch I usually use silicone. Although the red and tacky is a superior product I like the white lithium because I can buy it in a smaller squeeze tube. I also keep a tube of general purpose EP lube in the trailer just in case I need to repack a bearing on the road. Quote Link to post Share on other sites
Memphis 105 Posted August 2, 2013 Report Share Posted August 2, 2013 Most of my trips are under 2 hours so I am mostly worried about hitching and unhitching. I wrap a small pc of wax paper on the ball. I like to keep my ball clean and not get grease all over everyone while trailer is unhitched. If I was going on a long trip I would use a lite coat of lithium and be sure to clean up after uncoupling. Quote Link to post Share on other sites
ImDownWithDisney 342 Posted August 2, 2013 Report Share Posted August 2, 2013 Most of my trips are under 2 hours so I am mostly worried about hitching and unhitching.I wrap a small pc of wax paper on the ball. I like to keep my ball clean and not get grease all over everyone while trailer is unhitched. If I was going on a long trip I would use a lite coat of lithium and be sure to clean up after uncoupling.Good idea.Greasy balls can make for messy pants. Quote Link to post Share on other sites
Andrew Roberts 17 Posted August 2, 2013 Report Share Posted August 2, 2013 most of my trips I left the hitch attached to the trailer keep me from walking into it at the back of the truck. And I always grease the moving parts keeps them from rusting when sitting as well. Now with a fifth wheel I grease the pin but have the teflon pad for the plate. Quote Link to post Share on other sites
Nicki aka Rebelstand 272 Posted August 2, 2013 Report Share Posted August 2, 2013 The ball was probably lubed when the new hitch was installed. However, wether or not it's still lubed is a good question. I do know that IH does occasionally lube the stinger before sliding it into the receiver.... ftwildernessguy 1 Quote Link to post Share on other sites
Lou... 3,118 Posted August 2, 2013 Report Share Posted August 2, 2013 I do know that IH does occasionally lube the stinger before sliding it into the receiver.... It's like a car wreck. I saw Nicki's name as posting the last response on this thread, which I have purposely stayed away from, and had to stop and look.I should have stuck to my original plan. Nicki aka Rebelstand 1 Quote Link to post Share on other sites
Nicki aka Rebelstand 272 Posted August 2, 2013 Report Share Posted August 2, 2013 It's like a car wreck. I saw Nicki's name as posting the last response on this thread, which I have purposely stayed away from, and had stop and look.I should have stuck to my original plan. :rofl2: :rofl2: :rofl2: :rofl2: Quote Link to post Share on other sites
Nicki aka Rebelstand 272 Posted August 2, 2013 Report Share Posted August 2, 2013 It's like a car wreck. I saw Nicki's name as posting the last response on this thread, which I have purposely stayed away from, and had stop and look.I should have stuck to my original plan. I am actually talking about our Hensley Hitch. The hitch stays attached to the trailer while a square stinger is what is attached to the truck. In order to "hitch up" you back the stinger into the hitch... Quote Link to post Share on other sites
momof3kids-Yvonne 596 Posted August 2, 2013 Report Share Posted August 2, 2013 I am actually talking about our Hensley Hitch. The hitch stays attached to the trailer while a square stinger is what is attached to the truck. In order to "hitch up" you back the stinger into the hitch...Mmmm hmmm of course...that is exactly how we all read it. :rofl2: :rofl3: Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.